How To Program Nissan Remote
1.SIT IN CAR WITH DOORS AND WINDOWS CLOSED.
2.LOCK DOORS WITH POWER DOOR LOCK SWITCH ON DRIVER’S DOOR.
3.PUT IN AND PULL OUT KEY FROM IGNITION APPROX. 8 TIMES OR UNTIL YOU SEE THE HAZARD/TURN SIGNAL LIGHTS FLASH.(older models lights may flash after 4 or 5 times) YOU NEED TO DO THAT IN LESS THEN 10 SEC
4.WHEN HAZARD LIGHTS FLASH (ON 2005 AND NEWER MODELS THE GAUGE NEEDLES MAY JUMP A LITTLE INSTEAD), PUT KEY IN IGNITION AND TURN TO THE ACC POSITION.(when your hazard lights flash your car is sending a signal to be received by the remote)
5.PRESS LOCK BUTTON ON THE NEW REMOTE TRANSMITTER, LIGHTS SHOULD FLASH AGAIN.
IF YOU HAVE 2 REMOTES, 1 NEW AND 1 OLD OR 2 NEW ONES, PLEASE CONTINUE WITH STEPS 6 AND 7. IF NOT, SKIP TO END.
6.PRESS UNLOCK BUTTON ON DRIVER’S DOOR, THEN LOCK BUTTON ON DRIVERS DOOR, LIGHTS WILL AGAIN FLASH
7.PRESS LOCK BUTTON ON 2ND NEW OR OLD REMOTE. LIGHTS AGAIN WILL FLASH.
YOU ARE DONE. EXIT VEHICLE AND TRY YOUR REMOTE. IT WILL NOT WORK FROM INSIDE CAR OR WITH KEY IN IGNITION.
Download Remote Instructions
1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Nissan Altima remotes
2004 2005 2006 2007 2008 2009 Nissan Armada remote controls
1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Nissan Frontier truck keyless entry keyfobs
1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Nissan Maxima key fob controls
2003 2004 2005 2006 2007 Nissan Murano remote entry
1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Nissan Pathfinder remotes
1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 Nissan Sentra remote transmitters
2004 2005 2006 2007 2008 2009 2010 Nissan Titan remotes
1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 Nissan Quest remote keyless entry controls
2008 2009 2010 Nissan Versa keyless keyfobs
2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Nissan Xterra SUV remotes and keys
2003 2004 2005 2006 2007 2008 Nissan 350Z remotes
